Going through the planning process takes some time, but if you don’t do it on paper, you will do it with wool and it will take even longer. Knowing where to put the lights, mediums and darks will allow you to confidently color plan your rug by creating a value study.
The first step is to get a black line drawing of your pattern. Sometimes you can use the one in the designer’s catalog or it will be on the tag of your pattern. Most of the time, you have to make your own.
Overall steps: (see more detail below)
- Photograph your pattern
- Print it out so it fills 1 sheet of paper
- Trace the pattern
- Make multiple copies of the tracing
- If you are using a dark or medium background, color in the background and make more copies
- Using multiple copies, color in the motifs
Step 1: Photograph your pattern
The hardest part about getting a good photograph is about taking it from the right angle and getting a result that is as square as possible.
Here are a few suggestions to take a perfectly square photograph:
- Hang the pattern on a wall at eye level.

- Lay the rug on a piece of plywood that is propped up at an angle. Stand on a ladder and take the photo so that your camera lens is in line with the plywood.

- If you have a second story balcony, take the photo from there. You may need to prop the pattern up at an angle.
- Take the photograph as best you can and then square it up using software such as Photoshop.
Step 2: Print it out
Crop the photo to get rid of any unnecessary space around the edges. Print your photo as large as you can on a sheet of paper.
Step 3: Trace the pattern
Using tracing paper trace the black lines of your pattern. This step is necessary to remove the backing from your photo. You can often trace through another sheet of paper if you use a light box or hold the papers up to a window.
Step 4: Make multiple copies
Make three copies. That will give you one for a dark background, a light background and a medium one and still keep your original untouched.
Step 5: Color in the background and make more copies
Set one copy aside. That will be your light background. Color in the background of the other two using black and silver Sharpies. Keep all three as masters for dark, medium and light backgrounds. Now make multiple copies of each background master.
Step 6: Using multiple copies, color in the motifs
Continue this particular lesson in Light, Medium and Dark in the Methods Section.
When to use this method
This method works on most rugs. Not sure if it will on your pattern? Try it. Over time, you’ll begin to recognize which patterns will benefit from this method. A geometric rug will change dramatically based on where the light, medium and darks are placed. Doing the work on paper will make the hooking MUCH easier and it will also improve the rug. You’ll begin to discover little aspects of the pattern that you never noticed before. Now you can make the best decisions possible.
Lesson Bonus & Downloads
*The Amazon links below are affiliate links. That means that I earn a small commission for recommending this product, but I only recommend products I use and the links are provided for your convenience. They do not increase your price at all.





Leave a Reply
You must be logged in to post a comment.